User Manual Owner manual

59
98-05239 R1 EN
HOME OVERVIEWSETUP POWERAPPENDIX FULL SCREEN INTRODUCTIONGUIDANCE
Video
Video Setup is used to set up individual cameras while using an
Eight (8) Channel or Four (4) Channel Video Selector Module
(VSM) or a single directly connected camera. Up to 8 cameras can
be congured if a VSM is installed.
1. Press CONFIGURATION side tab .
2. Press
Video .
3. Select the appropriate check box(es):
►Reverse –
►Upside Down –
For normal video view un-check all check boxes.
4. Press RETURN arrow
or CONFIGURATION side tab
to return to the main Conguration screen.
Figure 6-57: Video
Conguration
Vehicle
Implement
AutoSteer
Tilt
Lightbar
GPS
Video
Cong-> Video
Video Setup Unavailable
If a camera or VSM is not connected, setup options will not be
available.
Figure 6-58: Video Unavailable
Conguration
Vehicle
Implement
AutoSteer
Tilt
Lightbar
GPS
Video
RealView Camera Full Screen Video View
View video feed(s) and setup cameras without GPS available.
Options for RealView Guidance are not available on this screen.
1. Press REALVIEW CAMERA FULL SCREEN VIDEO VIEW
bottom tab .
Figure 6-59: RealView Camera Full Screen Video View
Cong-> Video