User Manual Owner manual

69
98-05239 R1 EN
HOME OVERVIEWSETUP POWERAPPENDIX FULL SCREEN INTRODUCTIONGUIDANCE
Options
Options allows the operator to select between Simple or Advanced
Job Mode.
WARNING! Changing job modes deletes all internal job data.
1. Press DATA MANAGEMENT side tab .
2. Press
Options .
3. Press DOWN arrow
to access the list of options.
4. Select:
►Simple – Only bounded and applied area are displayed on
the home screen. Only the current job is available for saving
in Reports. Job specic information input with Fieldware
Link is not available.
►Advanced – Client, farm, eld, job, bounded area and
applied area are displayed on the home screen. All saved
jobs can be saved in Reports. With Fieldware Link, a user
can input client, farm and eld data as well as duplicate/edit
jobs for reuse of boundaries and guidelines.
5. "Changing job modes requires deleting all job data. Do you
wish to change modes?"
Press:
►Yes – to make the change
►No – to keep the current setting
6. Press RETURN arrow or DATA MANAGEMENT side tab
to return to the main Data Management screen.
NOTE: The job stored in Reports is not available for selection
(icons greyed out) when a job is active/started. Stop the
current job to enable the Reports function.
Figure 6-81: Options - Change Job Mode
Data
Manage Data
Transfer
OptionsReports
Data->Options
Job Mode
Advanced
Simple
Advanced
Data->Options
Job Mode
Advanced
Changing job modes requires
deleting all job data.
Do you wish to change
modes?
Yes
No