User Manual Owner manual

80
www.teejet.com
HOMEOVERVIEW SETUP POWER APPENDIXFULL SCREENINTRODUCTION GUIDANCE
0.0 km/h 32.85 ha
No GPS
12:32 PM 1 deg
8.9 <
Speed
Area
Time
Swath #
Heading
-13 7.2 km/h
Mark A
Speed
Area
Time
Swath #
Heading
GUIDANCE BAR
The Guidance bar keeps you informed of your choice of selectable job information (Current Speed, Accumulated Area, Current Time,
Swath Number and Heading), Navigation Activity (Cross Track Error (feet or metres), Current Activity and GPS Status) and Boom Status.
Figure 7-1: Guidance Bar Examples
Selectable Job Information
Speed – Displays the current speed of travel
Area – Displays the accumulated area that has had application
applied
Time – Displays the current time based on the selected time zone
Swath Number – Displays the current swath number in reference
to the initial guidance line. Number will be shown as a positive
number when the vehicle is to the right of the AB baseline or a
negative number when the vehicle is to the left of the AB baseline)
Heading – Displays the course of travel based clockwise from a
north base line. North = 0, East = 90, South = 180, West = 270.
Navigation Activity & Boom Status
GPS Status – Displays “No GPS” when GPS is unavailable or
“Slow GPS” when GPS is receiving GGA data at less than 5Hz.
Cross Track Error – Displays the distance from your desired
guideline.
Current Activity – Displays activities such as mark an A or B point,
approaching the end of a row, indicating to turn now and distance
to return to a marked point.
Boom Status – One dot is displayed for each boom section
programmed. A green dot indicates the section is active, a red dot
indicates the section is not currently active.
Navigation Activity & Boom Status
GPS Status
Cross Track Error
Current ActivitySelectable Job Information
Selectable Job Information
Speed
Area
Time
Swath Number
Heading
Selectable Job Information
Selectable Job Information
Speed
Area
Time
Swath Number
Heading