User Guide

1.2.1 Inventory Mode

If you want to keep the barcodes in the buffer of TMCT-10 for multiple uploading, you can

choose inventory mode. In inventory mode, TMCT-10 will count the number of the

barcodes automatically, and control the time, position etc. for uploading. Also, you can

clear the barcodes in the buffer after uploading. Following is the setup method:

1) Read ‘Enter Inventory Mode’ barcode to enter into the inventory mode

Enter Inventory Mode

2) If you want to recover to normal mode, read the ‘Enter Normal Mode’ barcode

Enter Normal Mode

3) Read the ‘Clear the barcodes in the buffer’ barcode to clear the barcodes (only

suitable for inventory mode)

Clear the barcodes in the buffer

4) Read ‘Data Uploading’ barcode to upload the barcodes in the buffer (only suitable for

inventory mode)

Data Uploading

5) Read ‘Upload Counting’ barcode to count the number of the barcodes (only suitable

for inventory mode)

Upload Counting

Note: Inventory function can be used under any scan mode mentioned in 1.5.