User Guide

73
3.14 CODE 11
Decide whether or not to enable Code 11. The TMCT-10 Scanner defaults disable Code
11.
Note: Read the "Disable Code 11" barcode will make the scanner can not read the Code
11 barcode. Thus, if the scanner can not read the Code 11 barcode, please trying to read
"Enable Code 11" to reset.
For example: Enable Code 11.
1. Read the "Enter Setup" barcode;
2. Read the "Enable Code 11" barcode;
3. Read the "Exit with Save" barcode.
Enable Code11
（*）Disable Code11
Enter Setup
Exit with Save
Exit without Save