User Guide

5.2.11 Code 93

Enable/Disable Code 93

Enable Code 93 (Default)

Disable Code 93

Message Length

Message length can be set to the maximum value, minimum value. The data between the maximum and

the minimum is valid.

The maximum value and minimum value can be set using Programming command. Please check the

programming command guide for the detail.

Code 93 max length command: 020D03. The parameter of this command can be set from min to 80.

Code 93 min length command: 020D02. The parameter of this command can be set from 0 to max.

Example: Set the Barcode Message length of the minimum value is 10; the maximum value is 25.

Programming command: Max: 020D0325 ; Min: 020D0210.

Code 93 Append

This function allows the scanner to append several Code 93 barcode data together before transmitting to

host. When the scanner encounters a Code 93 barcode with append character (ex. Space character), it

buffers the data until it reads a Code 93 barcode which does not have append character. Then the data is

transmitted in the order that the barcodes were read.

Enable Code 93 Append

Disable Code 93 Append (Default)