User's Manual

modes
use the input button to select between line in, bluetooth, FM radio or disk mode.
line in!
turn down the volume on spider before connecting.
connect your audio device with a 3-pole audio cable.
bluetooth
a flashing blue led shows spider is ready to pair.
pair with your desired device.!
when connected the led will turn solid blue.
press the play button to play/pause. double tap to skip track. triple tap to return to the previous
track.
the volume knob is motorized and will react to adjustments made over bluetooth.
radio
press the play button to search for the next available FM station.!
hold input and tap play to search backwards – down the FM band.!
to fine tune, use the tune wheel while holding the input button.
disk
spider comes with a bunch of mantras and other recordings.
light some incense.
skip to the next mantra using the play button.
pro tip: to change mantra speed, hold input and use volume knob.
headphone listening
connect a headset or headphones to the line in jack.!
with a microphone headset plugged in, press the button on the headset to activate mic.
in line in mode spider will act as a megaphone. great for protest rallies!
in bluetooth/FM/mantra mode the microphone is mixed with the playback material. the mix will
be recorded onto the tape.
for headphones without microphone – with 3-pole cables – press play button after plugging in.
spider automatically recognizes headsets with 4-pole cables.