User Manual

Owner’s manual 33
EN
TROUBLESHOOTING
PROBLEM POSSIBLE REASON POSSIBLE SOLUTION
FAULT 3 appears on the
display
• Water tank is not inserted
properly
• Water circuit fault
• Switch o the device, reinstall the
water tank correctly and switch on
the machine again
• Consult with an authorized service
point for check-up/repair
FAULT appears on the
display
• General fault • Switch o the device, disconnect
it from power mains, after a while
connect it again and switch on
• Consult with an authorized service
point for check-up/repair
Very loud noise coming
from the grinder
• Foreign body in the grinder • Consult with an authorized service
point for check-up/repair
Small quantity of foam
after frothing
• 3-step milk frother is blocked
• 3-step milk frother is not
installed properly
• Clean the 3-step milk frother
according to the instructions
in the Cleaning section
• Set the hot water/steam
knob switch in
position and
generate some steam
Coee barely drips from
the coee spout
• Grinding level is too ne
• Ground coee is too ne
• Set coarser grinding level
• Use a coarser grind
SPECIFICATIONS
Functions
Cup warming
Milk frother
Use coee beans or ground coee
Preparing two cups simultaneously
Steam function
Hot water function
Cup counter
Memory of last setting
Menu in 10 languages
Auto switch on and o
Full drip tray indicator
Removable drip tray and waste container
Removable water tank
Backlight display
Cup illumination
Automatic cleaning