Instruction Manual

Figure 10

Figure 11

Step 5 Hardware Kit

Screw (M4 x 10)

IMPORTANT: Use caution to ensure the Cable does

not get pinched or pulled while attaching the Foot

Platform Joint Cover.

Figure 10: Slide the top of Foot Platform Joint Cover

so that it fits inside the front of the Foot Platform and

then rotate the bottom of the Foot Platform Joint

Cover into place so that it rests on top of the Base,

enclosing the Foot Platform Joint.

Figure 11: Use the Step 5 Hardware Kit to attach

the Foot Platform Joint Cover over the Foot

Platform Joint and fully tighten 2 × Screws with

the Screwdriver provided.