Instruction Manual

Figure 17a & 17b: Slide the base of the Lower Right

Handle over the base of the Lower Left Handle until it

aligns with the Handle Support Bar.

Figure 18: Use the Step 8 Hardware Kit to attach

the Lower Right Handle to the Handle Support Bar

and Lower Left Handle.

Hand tighten 5 × Bolts with 5 × Washers through the

Lower Right Handle and into the Handle Support Bar

and Lower Left Handle.

Proceed to fully tighten all 9 × Bolts that attach the

Lower Handles to the Handle Support Bar with the

6mm Allen Wrench.

Figure 17b

Figure 17a

Figure 18

Step 8 Hardware Kit

Washer (M8)

Bolt (M8 x 20)

Bolt (M8 x 45)