User Manual

USER GUIDE
Using the Console
• When you begin to pedal, the Console will display readings
based on your performance, showing the time (TMR), calories
burned (CAL), distance (DST), and speed (SPD) (Figure 47).
• SCAN: While pedaling, the Console will automatically scan
through all the settings. To stop scanning automatically and to
cycle through to the setting you want to see, press the Console
Button. (Figure 47).
• RESET: To start at zero, holding down the Console button will
reset your settings.
• STOP: When you stop pedaling, the STOP will flash until you
begin pedaling again. If you are done with your workout, the
Console will automatically shut off.
FIGURE 47
Adjust Resistance
• To increase resistance, rotate the Resistance Adjustment Knob
clockwise, and to decrease resistance, rotate it counter-clockwise
(Figure 46).
FIGURE 46
18