Operation Manual

Wiring Instructions
(for U.K. only)
Customer relations helpline
About your factory fitted plug
(for U.K. only - supplied with selected models)
n Connect the Green/Yellow wire to
the terminal in the plug marked «E»
or by the earth symbol or
coloured Green or coloured Green
and Yellow.
n Connect the Brown wire to the
terminal in the plug marked «L» or
coloured Red.
n Connect the Blue wire to the
terminal in the plug marked «N» or
coloured Black.
n A 13 amp fuse should be fitted
when the appliance is connected to
a BS 1363A plug.
n Seek professional advice if you are
unsure of the correct procedure for
the above.
n The cord is already fitted with a
plug incorporating an appropriate
fuse. If the plug does not fit your
socket outlet, see paragraph below.
Should you need to replace the fuse
in the plug supplied an appro-
priately rated approved BS 1362
fuse must be used (refer to wiring
instructions for fuse rating).
n If the plug supplied does not fit
your socket outlet, it should be
removed from the mains lead and
disposed of safely. The flexible cord
insulation should be stripped back
as appropriate and a suitable
alternative plug fitted. The
replacement plug must be
equipped with an appropriate fuse.
n If the plug has external access to
the fuse (non-rewirable type plug)
please note that the fuse cover is an
important part of the plug. Please
ensure that it is always refitted
correctly. If you lose this cover
please do not use the plug. You
may contact Tefal UK Limited for a
replacement.
n If you need any help or advice,
please call our customer relation’s
team on :
- 0845 60214 54 (for UK)
- (1) 677 41 76 (for Ireland)
n WARNING : All appliances must be earthed
Important : The wires in this lead are coloured in accordance with the
following codes :
Green and Yellow : Earth
Brown : Live
Blue : Neutral
E
Green and
yellow or
green
L
Brown
or
Red
Fit correct fuse
Use cable gripper
N
Blue or
black
Notice 12L Inox.qxd 12/11/2001 14:46 Page 9