Instruction Manual

The first two or three times that you
use the kettle, throw the water away
because it may contain foreign
particles.Rinse the kettle and filter
separately.
To clean your kettle
Unplug it.
Leave it to cool and then clean with a
soft damp sponge.
Certain models are equipped with a
bottom surface or a heating element
which is gold-plated to limit scale
deposits and facilitate cleaning.
 Never immerse the kettle or its
base in water, as the electrical
connections and the switch must
not be allowed to come into
contact with water.
 Never use abrasive cleaning pads.
 Never rub the "gold" coating as
this will damage its surface.
To clean the filter (depending on
model)
The removable filter is made up of
fabric which retains the particles of
scale and stops them from falling into
your cup when you pour. This filter
does not treat the water or remove the
scale from it. It therefore preserves all
the qualities of the water.
With very hard water, the filter
becomes clogged with scale very
quickly (10 to 15 uses). It is important
to clean it regularly.
If it is wet, rinse it with water, and if it
is dry, scrub it gently. Sometimes the
scale does not come away; if so,
descaling is necessary.
Cleaning
Descale regularly, preferably at least
once a month and more frequently if
your water is very hard.
To descale your kettle, use:
 white vinegar :
- fill the kettle with half a litre of
vinegar,
- leave to stand for 1 hour without
heating.
 citric acid :
- boil half a litre of water,
- add 25g of citric acid and leave to
stand for 15 minutes.
 a specific descaling agent for plastic
kettles : follow the manufacturer's
instructions.
Empty your kettle and rinse it 5 or 6
times. Repeat if necessary
To descale your filter (depending on
model:
Soak the filter in white vinegar or
diluted citric acid. Rinse thoroughly
with water before putting back in the
kettle.

Never use descaling methods other
than those recommended.
THERE IS NO VISIBLE DAMAGE TO YOUR
KETTLE
• The kettle does not work or
stops before boiling
- Check that the kettle is plugged
in properly.
- The kettle has been operated
without water or scale has
accumulated, triggering the safety
system to prevent dry operation:
leave the kettle to cool and then fill
with water.
In the event
of a problem
Descaling