Instruction Manual

10
Recipes for Universal Mill
(Depending on model)
Quantities Operating time
Dried red chilli 30g 33s
Black pepper 30g 1min30s
Dried shrimp 25g 30s
Roasted rice 40g 16s
Black sesame 30g 21s
Peanuts 50g 4s
Onions 100g 13s
Pork (cut into a small pieces) 140g 20s
Pormesan (cheese cut into a small pieces) 100g 13s
CLEANING YOUR APPLIANCE
 Unplug the appliance and remove the accessories

Remove the jug and rinse it and its lid under running
water.

For easy cleaning, be sure to wash the removable parts
in water and a little washing-up liquid immediately
after use.

The mixer jug (A, B, C) and universal mill (F) can be
cleaned in the dishwasher in the top basket with the
“ECO” or “LIGHTLY SOILED” programme.

To clean the motor unit (D) , use a moist cloth. Dry it
carefully.

Never put the motor unit (D) under water or under
running water.

Empty the mixer jug (C) or universal mill bowl (f3)
before clean.
Cleaning system for the jar and blades
Fill the jug with 500ml of hot water (about 50°C), along with 2 or 3 drops of washing -up
liquid and turn the switch to the left on the “easy cleaning” position several times, in order to
automatically wash the blades and the jar.
Only use the recommended amount of water and washing- up liquid. An excess of washing -up
liquid creates more foam and consequently can lead to overflowing.
If the above cleaning process is not completed, you can additionally clean the jar with a sponge
and washing-up liquid. Please take extra care around the blades as they are very sharp. Then rinse
the jar thoroughly several times with warm water.
CAUTION: Handle them
with caution: the blades
of the blender jug and
accessories are sharp.