EN TurboPro TurboPro anti-scale www.tefal.co.
SUMMARY IMPORTANT SAFETY RECOMMENDATIONS Important safety recommendations........................................................................................................................ p. 5 Before first use....................................................................................................................................................................................................... p. 8 PREPARATION Which water should I use?......................................................
* EN Depending on model 3
IMPORTANT SAFETY INSTRUCTIONS • Please read these instructions carefully before first use. This product has been designed for domestic and indoor use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply. • Never unplug the appliance by pulling the power cord. Always unplug your appliance: before filling the water tank or rinsing the water tank, before cleaning the appliance, after each use.
physical, sensory or mental capabilities provided that they have been thoroughly instructed regarding use of the appliance, are supervised, and understand the risks involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Keep the iron and its cord out of reach of children less than 8 years of age when it is energized or cooling down.
or damage prior to use. If the electrical power cord is damaged, it must be replaced at an Approved Service Centre to avoid any danger. • The iron must always be placed on its base and never on its heel (for cordless irons) . • Your iron and its base must be used and placed on a stable surface. When you place the iron on its base, ensure that the surface on which the base is placed is stable.
BEFORE FIRST USE Remove any labels from the soleplate before heating the iron. Before using the steam function in your iron for the first time, we recommend that you allow the iron to operate a few moments in a horizontal position without coming into contact with your laundry. Keeping the iron in this position, push the steam button several times. During the first few uses, the appliance may produce smoke, a harmless odour and a light emission of particles.
PREPARATION Which water should I use? • Your appliance was designed to operate using untreated tap water. However, it is necessary to periodically clean the steam chamber to remove any mineral deposits. • Do not use pure demineralised or pure distilled water, water from clothes dryers, scented or softened water, or water containing additives (starch, perfume, aromatic substances, softeners, etc.
USE • Plug in the appliance. Adjusting the temperature and steam • Set the steam control to • Adjust the temperature control, referring to the table below. FABRIC LINEN / COTTON WOOL SILK SYNTHETIC (Polyester, Acetate, Acrylic, Polyamide) TEMPERATURE CONTROL POSITION Max •• • • = STEAM ZONE • The temperature indicator light turns on. OK • It will turn off automatically once the soleplate achieves the desired temperature.
Dry ironing • Set the steam control to • You may continue to iron when the indicator light turns off. Getting more steam max. • Set the thermostat control to “•••”. • Note: This setting is only suitable for cotton and linen. 1 sec. • Press the turbo steam button periodically (turbo steam). • To avoid water dripping on the laundry, maintain an interval of a few seconds in between each press.
Vertical steam ironing NO • Hang the item on a hanger and keep the fabric taut with one hand. The steam is very hot; never steam iron clothing while it is being worn—always use a hanger. max. • Set the thermostat control to “•••”. 1 sec. • Press the turbo steam button (turbo steam) 1 second, moving the iron from top to bottom. • Hold the iron at a distance of a few centimetres from the clothing to avoid burning delicate fabrics.
Dampening clothing (Spray) • When dry or steam ironing, press repeatedly on the spray button to moisten clothing and remove stubborn creases. • Ensure that there is water in the tank before using the spray button. NO While ironing • Do not lay the iron down on the soleplate; use the heel rest for this purpose. OK Auto-Off Function • If the iron remains unused for more than 8 minutes on the heel rest or more than 30 seconds.
IRON STORAGE AND MAINTENANCE Storing your iron • Unplug the iron and wait for the soleplate to cool (approx. 1 hour). 1H • E mpty the water tank. • Set the steam control to . • Wrap the cord around the bottom of the iron’s body. Store the iron on its heel rest.
Cleaning the anti-scale collector • Unplug the iron, empty the water tank and wait for the soleplate to cool down (approx. 1 hour). • Once the steam iron has completely cooled down, raise and turn the tab of the collector to unlock it. • Remove the collector from the iron, it contains the limescale collected in the iron. • To clean the collector thoroughly rinse in water to remove the limescale inside.
Cleaning the anti-scale valve (once per month) • Unplug your iron and empty the water tank. • To remove the anti-calc valve, open the water tank cover and pull on the valve near the steam control. 4h • Soak the valve for 4 hours in a glass of water with lemon juice. • Rinse the valve under the tap. Click • Insert the valve in place, pushing it until you hear a click. Beware! Never touch the end of the valve. The iron will not function without the anti-calc valve.
Descaling the steam chamber (3 times a year) • Allow your iron to heat up with a full water tank while on its heel rest and with the thermostat control set to •• or ••• setting (Linen / Cotton /Wool). Max. • Once the indicator light turns off, unplug the iron and place it over a sink. • Remove the anti-calc valve. • Shake the iron gently in a horizontal position over the sink until some of the water (containing the impurities) leaks from the soleplate.
• Unplug your iron and, once cooled, wipe it with a soft cloth. NO • Never use chemical or abrasive products. During the next use, turn on your iron in a horizontal position without putting it into contact with your laundry in order to eliminate any water containing mineral residues that remain in the soleplate. Cleaning the soleplate • Unplug your iron and, once cooled, wipe it with a soft cloth. NO • Never use chemical or abrasive products.
IS THERE A PROBLEM WITH YOUR IRON? PROBLEMS Water is leaking from the holes in the soleplate. The iron leaks at the start of ironing. A brown discharge coming from the soleplate is staining the clothing. The soleplate is dirty or brown and may stain clothing. POSSIBLE CAUSES SOLUTIONS You are using the steam Wait for the indicator light to turn when the iron is not hot off. enough. You are using the turbo Wait a few seconds between each steam button (turbo steam) use. too often.
IS THERE A PROBLEM WITH YOUR IRON? PROBLEMS POSSIBLE CAUSES SOLUTIONS The water tank is empty. Fill it up. Your iron produces little to The anti-calc valve is dirty. Clean the anti-calc valve. no steam. Your iron is clogged up with Clean the anti-calc valve and steam limescale. chamber. The anti-calc collector is Clean the anti-calc collector. dirty. Your iron is clogged up with Clean the anti-calc collector and steam chamber. limescale. Your iron has been used for Clean the steam chamber.
www.tefal.
