Operation Manual

86
• Connect the appliance:
- Your appliance has 5 speed levels
and a turbo button. Always begin
mixing or kneading at speed 
initially, then move to speed 
or
- To knead thick dough, we
recommend using speed only.
- You can also increase the speed by
pressing the turbo button 
We however recommend that you
use it only briefly (a maximum of 30
seconds for thick dough).
After finishing, set the speed control
 to 
Disconnect and press the unlock
button to raise the hinged arm.
Then press the mixer unlock button
to remove the mixer from its stand.
Then press the ejection button  to
remove the beaters or kneaders.


Check that the appliance is
unplugged, that the speed control
 is set toand that the beaters
or kneaders have been removed
from the appliance.
Lift the panel at the back of the
appliance and screw the blender
shaft  anti-clockwise without
forcing it until you hear a click






• Connect the appliance:
- Dip the blender shaft into the
preparation before starting the
appliance to avoid splashing.
- Start using the speed control ,
, initially at speed 1 then
. Use the Turbo button  if the
recipe requires more power.
- Stop the appliance before
removing the blender shaft from the
preparation (to avoid splashing).

Stop the appliance by selecting
, disconnect it and unscrew the
blender shaft  by turning
clockwise.

• In a container on a heat source.
Do not use it empty or with ice
cubes, to chop raw meat, dried fruit
(almonds, hazelnuts, etc.).



- Place the bowl  on the stabiliser
base .
- Fit the blade  on the shaft of the
bowl .
- Place the food in the bowl and
then fit the reducer .
Check that the appliance is
unplugged, that the speed control
 is set to  and that the beaters
or kneaders are no longer on the
appliance.
- Lift the panel at the back of the
appliance and place the appliance
on the reducer  of the mini-