Instruction Manual

32
A Removable mincer head
A1 Aluminium body
A2 Screw
A3 Self-sharpening stainless steel blade
A4 Grid (depending on model)
A4a Grid with small holes (very finely minced)
A4b Grid with medium holes (finely minced)
A4c Grid with large holes (coarsely minced)
A5 Aluminium nuts
B Removable tray
C Meat pusher
D On/off button
E Motor unit
Mincer head
(see fig. 1.1 to 1.4)
Prepare all the food to be minced; remove the bones, cartilage and nerves. Cut the meat into bits
(approx: 2cm X 2cm).
Tip: When you have finished mincing, put a few pieces of bread into the appliance to get all of the
mince out.
Sausage accessory
(see fig. 2.1 to 2.3)
Before using for the first time, wash all the accessories in soapy water. Rinse and dry them carefully.
The grid and the blade must remain oiled. Coat them with oil.
Do not use your product if it is empty and if the grids are not oiled.
Never put your fingers or any utensil into the funnel.
F Sausage accessory (depending on model)
G Kibbeh accessory (depending on model)
G1 Feeder nozzle
G2 Ring
H Vegetable slicer (depending on model)
H1 Cone/funnel chamber
H2 Pusher
H3 Cones (depending on model)
H3a Coarse grating cone (red)
H3b Fine grating cone (orange)
H3c Thick slicing cone (dark green)
H3d Fine slicing cone (light green)
H3e Chips cutter cone
H3f Cube cutter accessory
I Storage accessory (depending on model)
EN
N.B.: A booklet containing safety guidelines (LS-123456) is provided with this appliance.
Before using your appliance for the first time, please read the booklet carefully and keep it in a
safe place.
DESCRIPTION
TIPS FOR USE
USE