Operation Manual

22
Before using for the first time
Remove packaging
• Take your appliance out of its packaging. Keep your warranty card and carefully read the
operating instructions before using your appliance for the first time -
fig. 1 .
• Install your appliance on a stable surface. Remove the accessories and any stickers either inside
or on the outside of the appliance.
Warning
• This scoring tool is very sharp. Handle it with care.
Cleaning the pan
• Clean the pan of the appliance with a damp cloth. Dry thoroughly - fig. 2 . A slight odour may
be given off when used for the first time.
NO OK
Using
1. Before using your appliance
• Tilt the bread tank slightly to the side then unclip to remove it - fig. 3 .
• Fit the kneading paddles -
fig. 4 .
2. Add the ingredients
• Put the ingredients in the pan in exactly the order recommended
(see useful tips on page 28) -
fig. 5 .
• Make sure that all ingredients are weighed with precision.
3. Starting up
• Place the bread pan in the breadmaker - fig. 6 .
• Replace the bread trough and press on one side then the other to
engage the mixer drives and clip it in on both sides -
fig. 7 .
• Unwind the cord and plug it into an earthed electrical outlet.
• After the beep, programme 1 and medium browning are displayed by
default -
fig. 8 .
TIP
The kneading is
improved if the
kneading blades are
set facing each
other.
TIP
To get acquainted
with your
breadmaker, we
suggest you try
the recipe for BASIC
BREAD for your first
ever loaf. See the
sheet “BASIC BREAD
PROGRAMME”
on page 31.
TEFAL393-NoticeBaguette_and_co_Mise en page 1 16/12/09 18:40 Page22