Instruction Manual

EN
17
TEFAL answers your questions
Problems Recommendations
If you cannot close the
lid:
Check that the Open/Close handle is in the vertical
position.
Check the way up the seal is fitted, see the
"Cleaning and Maintenance" heading.
If the NutriCook has
heated up under
pressure with no liquid
inside:
Have your NutriCook inspected by a TEFAL
Approved Service Centre.
If the pressure
indicator did not rise
and nothing escapes
from the valve during
cooking:
Check that:
- The cooking program selector is set to one of the
cooking programmes.
- Your NutriCook is properly closed.
If the pressure
indicator has risen but
still nothing escapes
from the valve during
cooking:
This is normal for the first few minutes.
If the problem persists, select the . programme.
Wait for the pressure indicator to drop then move
the Open/Close handle to the vertical position.
Clean the operating valve and steam release
outlet under running water and check that the
safety valve moves: Fig. 17. See the "Cleaning
and Maintenance" heading.
If steam escapes from
around the lid, check:
That the lid is properly closed.
The position of the lid seal is the correct way up.
That the seal is in good condition, and if
necessary, replace it.
That the lid, the seal, its seat in the lid are clean.
That the edge of the NutriCook pan is in good
condition.