Instruction Manual

18
Problems Recommendations
If steam escapes from
around the lid together
with a piercing noise,
check :
That the seal is not caught between the body and
the lid.
If you cannot open the
lid:
Check that the selector is set to .
Check that the pressure indicator is down.
If not: release pressure.
Never tamper with this pressure indicator.
If food is not cooked or
has burnt, check:
The cooking time is correct.
The heat level was neither too low nor too high.
That the cooking program selector was in the right
position.
The amount of liquid was sufficient for the
cooking time.
If food has burnt in the
NutriCook:
Fill the pan with water and leave the NutriCook to
soak for a while before washing.
Never use bleach or chlorine products.
If one of the safety
systems is triggered:
Turn off the heat.
Leave the NutriCook to cool down without moving
it or turning the programme selector (F) to the
steam release positon.
Wait for the pressure indicator to drop down and
open the NutriCook.
Check and clean the operating valve, the steam
release outlet, the safety valve and the seal.
If the fault persists, have your NutriCook inspected
by a TEFAL Approved Service Centre.
If the decompression
valve (O) is
disassembled :
Have your NutriCook
®
inspected by a TEFAL
Approved Service Centre.
Environment protection first !
i Your appliance contains valuable materials which can be re-
covered or recycled.
‹ Leave it at a local civic waste collection point