Instruction Manual

52
EN
• The following NutriCook accessories are available from
shops:
• To replace other parts or have repairs performed,
please call on your local SEB/Tefal Approved Service
Centre.
• Only use SEB/Tefal genuine parts designed for your
product model.
• Make sure that the cooking programme selector (F) is in
the position and that the pressure indicator is down.
• Move the handle from the horizontal to the vertical
position (the jaws open): Fig 1.
• Lift the lid.
• Make sure that the cooking programme Selector (F) is
in the [pictogram steam release] position and the
Opening/Closing handle (E) is in the vertical position.
• Place the lid on the pressure cooker, taking care to
ensure that it is correctly positioned.
• Move the Open/Close handle from the vertical to the
horizontal position. Fig 2.
• Apply a little force at the end when closing to trigger
the locking mechanism.
• Once in the closed position, it is normal that the lid can
turn freely on the NutriCook pan.
If you cannot close the lid:
• Check that the Open/Close handle is in the vertical
position.
• Check that the seal is in place properly.
• The removeable control module is designed to make it
easier to clean your NutriCook.
• Once you remove the timer, the pan and lid are
dishwasher safe.
SEB/Tefal accessories
Accessories Reference numbers
Lid seal 8 L X1010003
Timer X1060003
Control module
Closing
Opening
During
Opening/Closing
operations, the control
module must be in
place on the lid.
The jaws must be in
contact with the edge
of the lid.
IFU Nutricook SEB TEFAL_9L 4135696:4135696 4/01/10 14:58 Page 57