User's Manual

15
Introduction
Regulatory standard compliance
The list of national and international electromagnetic compatibility, safety, reliability and
RoHS standards in this chapter is not exhaustive. The standards listed are generally
regarded as the primary applicable standards. The conformity status on additional
national and international standards not listed in this section can be provided upon
request.
Regulatory standards compliance
Specification
Standard
EMI/EMC
FCC Part-15, Subpart B, Class-A
ICES-003, Class-A
EN 300386
EN 55022 Class-A / CISPR-22 Class-A
EN 55032 Class-A / CISPR-32 Class-A
EN 55024 / CISPR-24 (EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5, EN61000-4-6, EN 61000-4-29)
EN 61000-3-2, EN 61000-3-3 and EN61000-4-11 (applicable to AC
power supply products)
Safety
Certified for CB – Scheme
IEC 60950-1 / EN 60950-1
IEC 62368-1 / EN 62368-1
UL 62368-1
UL 60950-1
CAN/CSA-C22.2 No.60950-1
CAN/CSA-C22.2 No.62368-1-14
Laser Safety
IEC 60825-1 / EN 60825-1
IEC 60825-2 / EN 60825-2
21 Code of Federal Regulations (CFR)1040
Environment
ETS 300 019-1-1, Class 1.2 Storage
ETS 300 019-1-2, Class 2.3 Transportation
ETS 300 019-1-3, Class 3.2 Operating stationary use
QM333 – Functional for Environmental testing of Electronic
equipment’s for Transmission and switching use.
RoHS compliant
Directive 2015/863/EU
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.