User's Manual

37
User Interface Configuration
Table 15: WLAN Access Control parameters
Parameters
Description
Mode
Allows you to select the desired mode from the drop down menu. Available
options are:
 Disabled: Access control will be disabled.
 Allow Listed: Only WLAN clients whose MAC address are in the access
control list will be able to connect to your Access Point.
 Deny Listed: WLAN clients on the access control list will not be able to
connect to your Access Point.
MAC Address
Allows you to enter the specified MAC address in the text box provided.
Current Access Control List
MAC Address
Displays the configured MAC address of the Access Control list.
Select
Allows you to select the check box against the desired MAC address for
deletion.
 To delete all configured access control list on the pane, click on Delete All
button. Check box against all MAC address on the page will get selected
and will be deleted.
 To delete desired access control list on the pane, click on Delete
Selected button and select the check box against the MAC address
desired to be deleted.
Site Survey
Go to wlan0 (5GHz)/ wlan1 (2.4GHz) -> Site Survey in the navigation pane. WLAN
Site Survey page is displayed. This page provides tool to scan the wireless network. If
any Access Point or IBSS is found, you could choose to connect it manually when client
mode is enabled.
Following figure shows the WLAN Site Survey page of wlan0 (5GHz) or wlan1 (2.4GHz):
Figure 13: WLAN Site Survey- 5GHz/2.4GHz