User's Manual

44
TJ2100N-14ET User Manual
Parameters
Description
Connection Type
Allows you to select the connection type from the drop down
menu.
 Other
 TR069
 INTERNET
 INTERNET_TR069
 VOICE
 VOICE_TR069
 VOICE_INTERNET
 VOICE_INTERNET_TR069
MTU
Allows you to enter the maximum size of a packet that can be
sent through the interface. This parameter is applicable only
when Channel Mode is selected as IPoE, PPPoE, and 6rd.
IP Protocol
Allows you to select the IP protocol from the drop down menu.
 IPv4
 IPv6
 IPv4/IPv6
WAN IP Settings: These parameters are displayed only when Channel Mode is
selected as 'IPoE' or '6rd'.
Type
Allows you to set the type of WAN IP by selecting the radio
button as 'Fixed IP' or 'DHCP'.
Local IP Address
Enter the local IP address in the text box provided.
A local IP address is used inside a private network to locate the
computers and devices connected to it.
Remote IP Address
Enter the remote IP address in the text box provided. This is
used to access a computer or device remotely.
Subnet Mask
Enter the subnet mask, a 32-bit number that masks an IP
address, and divides the IP address into network address and
host address.
IP Unnumbered
Select the check box to enable IP unnumbered interface, method
that you can use to enable IP processing on a Point to Point
interface without assigning it an IP address to conserve the IP
address space.
Request DNS
Allows you to enable or disable DNS request by selecting the
desired radio button.
Primary DNS Server
Enter the IP of the primary DNS server in the text box provided.
Secondary DNS Server
Enter the IP of the secondary DNS server in the text box
provided.
PPP Settings: These parameters are displayed only when Channel Mode is
selected as 'PPPoE'. External PPPoE server is needed for authentication.