User's Manual

45
User Interface Configuration
Parameters
Description
UserName
Enter the user name in the text box provided.
Password
Enter the password in the text box provided.
Type
Allows you to select the type from the drop down menu.
Idle Time (sec)
Enter the idle time in seconds.
Authentication Method
Allows you to select the authentication method as 'AUTO' from
the drop down menu.
AC-Name
Allows you to enter the AC (Access Concentrator) name in the
text box provided.
Access concentrators are used to route PPPoE connections. These
devices allow the service providers to grant access to large
numbers of users without needing to create a dedicated
connection for each one.
Service-Name
Allows you to enter the service name in the text box provided.
IPv6 WAN Setting: These parameters are displayed only when Channel Mode is
selected as 'IPoE' or 'PPPoE'.
Address Mode
Select the address mode from the drop down menu.
Request DNS
Allows you to enable or disable DNS request by selecting the
desired radio button.
Primary IPv6 DNS
Enter the IPv6 address of the primary DNS server in the text box
provided.
Secondary IPv6 DNS
Enter the IPv6 address of the secondary DNS server in the text
box provided.
6rd Config: These parameters are displayed only when Channel Mode is selected
as '6rd'.
Board Router v4
Address
Allows you to enter the IPv4 address of the router in the text box
provided.
6rd IPv4 Mask Len
Allows you to enter the IPv4 mask length for 6rd configuration.
6rd Prefix
Allows you to enter the 6rd Prefix, IPv6 prefix assigned by a
carrier for a 6RD address.
6rd Prefix Length
Allows you to enter the prefix length, that indicates the number
of high-order bits to be deleted from the source tunnel address
(an IPv4 address).
Port Mapping
Allows you to select the ports in the check box for deletion.