User's Manual
Table Of Contents
- Overview
- Introduction
- Hardware Architecture
- User Interface Configuration
- Basic Configuration
- LAN Interface Settings
- WLAN Configuration
- WAN Configuration
- Services
- VoIP
- Advance
- Admin
- Statistics
55
User Interface Configuration
Select or enter the required parameters by referring to Traceroute Diagnostics
parameters and click on Go button.
Table 24: Traceroute6 Diagnostics parameters
Parameter
Description
Host Address
Allows you to enter the host address in the text box provided.
Number Of Tries
Allows you to enter the number of attempts in the text box provided.
Time out
Enter the timeout in seconds.
Data Size
Enter the data size in bytes.
Max HopCount
Enter the maximum hop count in the text box provided.
WAN Interface
Allows you to select the WAN interface from the drop down menu.
UPnP (Universal Plug-n-Play)
Go to Service->UPnP in the navigation pane. UPnP Configuration page is displayed.
This page is used to configure UPnP (Universal Plug and Play). The system acts as a
daemon when you enable it and select WAN interface (upstream) that will use UPnP.
Figure 27: UPnP Configuration