User's Manual

61
User Interface Configuration
Enter the desired values by referring to MAC Filtering parameters table and click on
Add button.
Table 29: MAC Filtering parameters
Parameter
Description
Outgoing
Default Action
Allows you to 'Deny' or 'Allow' outgoing default action by selecting the
desired radio button. Click on Apply Changes button to save the changes.
Direction
Select the direction of the port from the drop down menu.
 Outgoing
 Incoming
Source MAC
Address
Enter the source MAC address in the text box provided.
Rule Action
Allows you to 'Deny' or 'Allow' rule action by selecting the desired radio
button.
Current Filter
Table
Entries in this table are used to restrict certain types of data packets from
the local network to Internet through the Gateway. Use of such filters can
be helpful in securing or restricting your local network.
Select the check box against the desired interface for deletion and click on
Delete Selected button.
To delete all configured interfaces on the pane, click on Delete All button.
Check box against all interfaces on the page will get selected and will be
deleted.
Figure 31: MAC Filtering for bridge mode