User's Manual

85
User Interface Configuration
Table 39: DHCP Settings parameters
Parameter
Description
DHCPv6 Mode
Allows you to set the DHCPv6 mode by selecting the radio button against
'DHCP Relay' and 'DHCP Server' and click on Apply Changes button.
On clicking, Show Client button, Active DHCP Clients page is
displayed that shows the assigned IP address, MAC address and time
expired for each DHCP leased client. Following parameters are displayed
in Active DHCP Clients page:
 IP Address
 MAC Address
 Expired Time (sec)
Click Refresh button to reload the page.
Click Close button to close the page.
NTP Server IP
Enter the NTP Server IP details and click on Add button.
NTP Server Table
Allows you to select the check box against the desired NTP server for
deletion.
 To delete all configured NTP server on the pane, click on Delete All
button. Check box against all NTP servers on the page will get
selected and will be deleted.
 To delete desired NTP server on the pane, click on Delete Selected
button and select the check box against the NTP server desired to be
deleted.
Host Name
Enter the host name in the text box provided and click on Add button.
MAC Address
Enter the MAC address in the text box provided.
IP Address
Enter the IP address in the text box provided.
MAC Binding
Table
Allows you to select the check box against the desired MAC address for
deletion.
 To delete all configured MAC address on the pane, click on Delete All
button. Check box against all MAC address on the page will get
selected and will be deleted.
 To delete desired MAC address on the pane, click on Delete Selected
button and select the check box against the MAC address desired to
be deleted.
DNS Relay: This page is used to configure the DHCPv6 Server IP Address for DHCP Relay.
DHCPv6 Server
IP Address
Enter the IP address of the DHCPv6 Server in the text box provided. Click
on Apply Changes button, to save the changes.