User manual

80
U
K
8. PROGRAMMING THE AMOUNT OF COFFEE BEANS TO
BE GRINDED
This espresso machine has already been calibrated in factory to dispense
the ideal measure of ground coffee for one cup of espresso.
However this quantity of ground coffee can be increased or reduced, then
the selected measure is stored. The programmable measure of ground cof-
fee refers to both the espresso selection and to regular coffee selection.
Put the machine on stand-by mode as described.
•
•
•
Keep the start control pressed for 10 seconds.•
Some LEDS will ash, working as indicators, (the more are the LEDS illumi-
nated the greater the quantity of coffee). Before adjusting make a note of
the original setting so that the machine can be reset to the factory settings
if required.
•
To increase or decrease the quantity of ground coffee just press the “es-
presso” control to decrease and “regular coffee” control to increase.
•