User's Manual

GB
19
If something doesn’t work
Fault Possible cause Possible solution
Neither the hotplates nor the pilot lights are working
The cable is not con-
nected to the mains
Connect the cable
to the mains
There is no spark when the
automatic ignitiion control is pressed
There is no current at
the plug
Check/repair the electri-
city at the mains
The gas burners are making the pans dirty
The burner openings
are dirty
Clean the burner
openings
The injector or injector
holder is dirty
Clean the porta-injector
and injector without
using anything which
could damage or alter
the diameter of the gas
outlet opening
Before calling the Technical Service, please
make the following checks:
There is a spark but the burner does not ignite
The spark plug and the part
of the burner where the
spark should be is soiled or
greasy
Clean the end of the
spark plug and the
burner
The gas burners do not light
Gas is not coming through
to the hob
Check that the gas
cylinder tap is properly
open
If it is piped gas, open
the gas tap
The burner ignites, however, when you release the knob
activating the safety feature, it goes out again
The flame does not appear
in the area heated by the
thermocouple
Clean the burner’s
openings