User's Manual

36
EN
During operation...
During the cooking process, you may open the
door at any moment, as:
• THE PRODUCTION OF MICROWAVES IS
IMMEDIATELY INTERRUPTED.
• The grill is deactivated and remains at a
high temperature.
• The timer stops and the screen shows the
operating time that is left.
If you wish, you may:
1. Turn around or move the foods to ensure
uniform cooking.
2. Change the power of the microwave, using
the “-“ and “+“ buttons.
3. Select another function, using the function
buttons.
4. Adjust the operating time that is left, by
pressing the “-“ and “+” buttons.
Close the door again and press the start button.
The appliance will start to function again.
Function interruption
To interrupt the programme, press the STOP
button or open the door of the appliance.
If you wish to cancel the cooking process, close
the door again and press the STOP button. The
oven will beep and the screen will display the
time.
End of programme
When the programme is finished, the microwave
beeps 3 times and the screen displays “End”.
The beeps are repeated every 30 seconds, until
the door is opened or the “STOP” button is
pressed.
Energy Saving
This microwave is equipped with a special
energy-saving system, which is enabled
automatically after 10 minutes of inactivity.
In the energy-saving mode, all the buttons are
off and the screen only displays the clock.
The energy-saving mode is automatically
disabled when a function button is pressed.