User's Manual

Page 25 Page 26
J Note: Pressing the DSC key at any time aborts the current function and selects
the Send Call Main Menu.
1. Press DSC key.
The Send Call Menu appears in the text area of the display.
Rotate the Channel/Select knob to select “GROUP” Press the
Channel/Select knob to enter The Send Call Menu reconfigures to display
the Call Type selection menu.
2. Select “GROUP”. Press the Channel/Select knob to enter.The Send Call
Menu reconfigures to display the select “CH”.
u
3. Rotate the Channel/Select knob to select the take channel Press the
Channel/Select knob to enter. The Send Call Menu reconfigures to display
to appear, the default call type is ROUTING
l
4. Press the Channel/Select knob to send a GROUP CALL, then press ”PTT”
to communicate.
5.3.4.1 Sending an Individual Call ship (MMSI not in Buddy List)
Individual calls are initiated with the following procedure.
J Note: Pressing the DSC key at any time aborts the current function and selects
the Send Call Main Menu.
1. Press DSC key.
The Send Call Menu appears in the text area of the display.
2. Rotate the Channel/Select knob to select “INDIVIDUAL”. Push the
Channel/Select knob to enter.
The Send Call Menu reconfigures to display the call shore call ship selection
menu .rotate the Channel/Select knob to select call ship, push the
Channel/Select knob to select to call ship .the“ MUNUAL MMSI and
“BUDDY LIST ”appears on the screen. select the “MUNUAL MMSI push the
Channel/Select knob to enter the MMSI Enter screen
On the MMSI Enter screen, rotate the Channel/Select knob to change the
individual digits in the MMSI number. Once each digit is set, press
3. the Channel/Select knob to enter the digit and advance to the next. At the
end the MMSI number, the Text Area of the display reconfigures to show
the “select ch “ menu.
The characters available in the digit string are 0-9 and "<" (back arrow).
Selecting the "<" and pushing the Channel/Select knob selects the previous
character in the MMSI for editing.
(Only in the case of a call to a ship, it is permitted to enter a talk channel from a
ific list of intership channels; a call to a coast station, the coast station will
specify the channel to talk on in its acknowledgement.)
4. Rotate the Channel/Select knob to select the talk channel. Push the
Channel/Select knob to enter the channel and proceed to the MMSI Enter
screen. Otherwise, go to step 5.
5. From the Confirmation Screen, push the Channel/Select knob to send the
call.
The Text Area displays the CALLING {MMSI} message while the call is
made.
If the call is acknowledged, the text area momentarily displays the {MMSI}
ACKNOWLEDGED message and the radio tunes the Talk Channel and
returns to normal VHF operation.
If the call is NOT acknowledged, the Try Again Confirmation menu is
displayed. See 5.3.3.1.1.