User's Manual

Page 39 Page 40
enter the setting and return to the Set-Up Menu.
6.12 USER MMSI ENTRY
1. Press and hold DSC key to display the Set Up menu.
2. Rotate the Channel/Select knob to select “USER MMSI”. Press the
Channel/Select knob to select User MMSI for adjustment.
3. The display reconfigures to show the User MMSI entry screen.
4. Rotate the Channel/Select knob to select the first character (1-9, or Space
or Back Arrow "<") for the MMSI. When the desired digit is shown, press the
Channel/Select knob to enter, and subsequently select the next character
for adjustment. Enter each character for the name using this procedure.
When the last digit is entered, the confirmation screen appears.
5. The characters available in the digit string are 0-9 and "<" (back arrow).
Selecting the "<" and pressing the Channel/Select knob selects the previous
character in the MMSI for editing .
6. From the Confirmation Menu, Rotate the Channel/select knob to select
“SAVE” (default selection) and press Channel/Select to permanently save
the MMSI. Select “CANCEL” and press Channel/Select knob to discard the
information and return to the Set-Up Main Menu.
6.13 GROUP MMSI ENTRY
The procedures are same as that of user’s MMSI entry.
6.14 RESET OPERATION
Follow this procedure to reset User Settings.
1. Press and hold DSC key to display the Set Up Main Menu.
2. Rotate the Channel/Select knob to select “RESET ”. Press the
Channel/Select knob to select “RESET” for adjustment.
The display reconfigures to show the Reset Menu Entry screen.
3. Rotate the Channel/Select knob to select “USER SETTINGS”. Press the
Channel/Select knob to enter.
The display reconfigures to show the Confirmation Menu.