User's Manual

Page 23 Page 24
4 Once the call is sent, the text area of the display momentarily shows the
Calling All Ships message. And then the radio returns to normal VHF
operation on channel 16 with high power, except ROUTING. Press PTT to
talk.
5.2.3 Send a GROUP Call
This feature allows the user to contact a group of specific vessels using
DSC and to automatically switch to a desired channel. Before sending a
GROUP call, you must be set the GROUP MMSID
1. From the DSC/MENU select the GROUP CALL item. Press the CH key the
screen displays the names of your groups.
2 Select the group that you want to call, then select the channel Press the CH
knob to send a group call. Once the call is sent, the Text area of the display
momentarily shows the Calling group message.
3 After the GROUP CALL is transmitted, the radio will return to normal VHF
with the designated channel.
4 Press the PTT to start talk.
5.2.4 MAKE A ROUTING CALL (INDIVIDUAL)
You can make an individual call, either to a ship or to a boast station.
5.2.4.1 Manually Sending an Individual Call
1. Press DSC /MENU to DSC mode, then select “NEW CALL”. Press the CH
knob The arrow is pointing to <MANUAL>
2. Press the CH knob again access manual enter ID screen, enter the MMSI
number using the CH knob, when MMSI entry is complete, press the CH
knob to accept the selection
3 Then rotate the CH knob to select the working channel and press the CH
knob to accept select.
(Only in the case of a call to a ship, it is permitted to enter a talk channel; a call
to a coast station, the coast station will specify the channel to talk on in its
acknowledgement.)
4 The radio summarizes the call details and to ask for confirmation to send the
call (send?).
5 Press the CH knob again to send the call. The radio goes to CH 70 and the
icon-Tx is displayed on the screen while the DSC call is being sent, then
LCD display an awaiting acknowledgment.
6 If the call is acknowledged, press PTT to talk
7 If the call does not get with in 16second, the radio prompts you to
resend the call.
8 If you do nothing for 5 minutes, the individual call cancelled and the
radio revert to the original channel.
5.2.4.2 Sending an Individual Call (MMSI stored in Buddy list)
1 Press DSC /MENU to DSC mode, then select “NEW CALL”. Press the
CH knob, the arrow is pointing to <MANUAL>
2 Rotate the CH knob select the person of the Buddy list that you want to
call. The procedures are as same as manual to send an individual call.
450078964
IND ROUTING
>SEND
CANCEL
450078964
IND ROUTING
>SELECT CH
PRESS ENTER
450078964
INDIVIDUAL
ROUTING
AWAITING ACK
SELECT GROUP
> BBLIA
CHAIRIST
SEAWATCH
BBLIA
ID02007003
>SELECT CH
PRESS ENTER
>LAST
NEW CALL
GROUP
ALL SHIPS
><MANUAL>
FINITISIC
INSLAND
ALICESS
MANUAL IND
ROUTING
ENTER MMSID:
ID - -- - - - - - --
BBLIA
ID02007003
>SEND
CANCEL
PILOTAGE
21’22.0012N
120’40.1001E
10:15 UTC
RETRASMIT
IND ROUTING
>SEND
CANCEL