User's Manual

Page 25 Page 26
5.2.4.3 ACKNOWLEDGEMENT OF AN INDIVIDUAL INCOMING CALL
The radio either automatically or manual send an acknowledgement to
the requesting radio depend on setting, The USA will automatically send
an acknowledgement to the requesting radio within 10 seconds of
receiving the call.
5.2.5 LAST CALL (RECALL THE MOST RECENT INCOMING CALL)
This facility also is useful and is used frequently as routing individual call
1 Press the DSC / Menu key to enter the DSC mode LAST CALL
will be pointed, press CH key to display the detail information of
the last call
2 Select the working channel for individual call and press CH key,
the radio summarizes the call details and ask for confirmation
to send the call (send?).Press CH knob to send the call other
operation as same as the section 5.6.1
5.2.6 SEND an INDIVIDUAL CALL USING THE CALL LOG
The CALL LOG contains the contact details for the 20 most recent
incoming calls, so you call any of them again quickly
1 Press the DSC / Menu key to enter the DSC mode, select
CALL LOG, press up/down key to scroll for previous call.
2 Press the CH key to conform the choice then follow the as the
ways to make the call in5.6.1
(To save this log entry you BUDDY LIST, select SAVE, then press ENT
key and enter a name the logged MMSID is automatically displayed.)
5. 2.7 POS REQUEST AND POP REPLY
5. 2.71 POS REQUEST (REQUEST THE LL POSITION OF ABUDDY)
The option enables you to request GPS position information from any
vessel for which an MMSI number is known.
1 Select the POS REQUEST on the DSC Menu, press the CH
key to enter the buddy list (<MANUAL> AND PHONEBOOK)
select the one for position information.
2 The Call will be initiate and same as individual call procedures.
See 5.6.1
5.2.72 POP REPLY
The position relay can to send your position to another radio
with this feature. Your radio must have an operating GPS
receiver connected to be used to send to the position.
POS relay can manually send your position or do it automatic t
which depending upon on your setting the set
On the manual reply, operation procedures as follow:
1 when you received POS request call, an alarm pi sounds LCD
displays as follow:
2 Press the CH key to transmit your own ships’ position and time
information
3 Press [CLR] to record the received information, then the screen
goes back to default.
5.3. Receiving a DSC Call
When a DSC call is received, the radio automatically responds
based on the type of call. The information displayed on the
LCD varies depending upon the call type. See chart below.
5.3.1 Receiving Distress Call
1 When a distress call is received, the radio automatically tunes
to channel 16, and the Distress Alarm Tone sounds. The call
date is stored in the distress. Log. Pressing any key disables
the alarm.
3 When position data is included within the signal, it is displayed
in the Text Area of the LCD. When no position data is included
within the signal, the message "99 ° 99.9999X, 999 °
99.9999Y" is displayed in the Text Area of the LCD.
2 You must continue to monitor channel 16 as a coast station
may require assistance in any rescue attempt
5.3.2 Receiving a Distress ACK Send from a coast station
1 When a Distress Relay Call is received, the Base Station
automatically tunes to Channel 16, and the Distress Alarm
Tone sounds. Pressing any key disables the alarm.
When position data is included within the signal, it is displayed
in the Text Area of the LCD. The call date is stored in the
distress log
2 You must continue to monitor channel 16 as a coast station
may require assistance in any rescue attempt
DISTRESS
ID0450078964
21’09.1011N
120’20.0111E
DISTRESS
ID4050078964
SINKING
12: 45UTC