User manual



You can use Delete All to delete all channels from
the list.
 = Add,  = Del,  = Delete All,
 = Scan. (See bottom line.)

Press pq to select TV Setup and press .
Use pq to move to the following sub-menus TV
Format, TV System, OSD Transparency, Banner
Display Time and Video Output.

Press tu to change settings for TV Format (4:3 LB,
4:3 PS, 16:9 PB,16:9 AUTO).

Press tu to change settings for TV System (PAL,
NTSC, AUTO).

Press tu to change settings for OSD Transparency
(1~ 8 ).

Press tu to change settings for Banner Display
Time (1sec, 3sec, 5sec, 10sec, 30sec, Always).

Press tu to change settings for Video Output (RGB
or CVBS).
RGB will give you the best performance.

Press pq to select PIN Code and press .
Use pq to move to the following sub-menus
Menu Lock, Channel Lock, Parental Control and
Change PIN.

Press tu to change settings for Menu Lock (Yes or
No).
This option will ask you for a pin code if you like to
enter the menu.  
 With active menu lock some functions
in the channel editing are not available.

Press tu to change settings for Channel Lock (Yes
or No).
This option will ask you for a pin code if you try to
enter a locked Channel. )

Press tu to change settings for Parental Control.
(No Restriction, All Programmes, 02 ~ 18.)
This option will ask you for a pin code if you try to
enter a channel with your restrictions. 


Press tu to change settings for Change PIN (Yes
or No).
If you select Yes, this option will ask you to Enter Old
PIN code rst and then you will be asked to Enter
New PIN for 2 times.

Press pq to select Set Timer and press .
This option will bring you to a timer screen.
To Add a timer, push the  button and use pq
tu to change settings.
Your receiver will switch to the right channel at the
right time, even from standby.
You are able to set 10 timers at most.
If you would like to change a timer setting, use pq
to highlight the timer number and use the 
button for Edit or the  button to Delete.

Press pq to select Set Default and press .
A pop-up screen will ask you: “Set factory default?”.
Press  or .
Please be careful when using this function, as it will
erase all the data and parameters you may have set
earlier. Once you have set to Default you will have to
re-install your preferences and re-scan channels. The
receiver will return to its factory default state and all
user data will be deleted.
 Before you set to Default, make a
backup on a USB Device! (Chapter
5.4.6.3 Backup to USB.)