User manual
In a closed or poorly ventilated cabinet; directly on
top of or under any other equipment; on a surface
which might obstruct the ventilation slots.
To direct sunlight or near any other equipment
that generates heat; to rain or intense moisture;
to intense vibration and to any shock which may
cause permanent damage to your receiver or to
any magnetic objects, such as loudspeakers,
transformers, etc.
Do not use a damaged power cord. It may cause a
re or an electrical shock. Do not touch a power cord
with wet hands. It may cause an electric shock.
When the receiver is not used for a long period of
time, you should unplug the power cord from the
wall socket.
Do not use alcohol or ammonia based liquids to
clean the receiver. If you wish, you may clean your
receiver with a soft lint-free cloth slightly made damp
with a mild soap solution, only after disconnecting
from the mains voltage supply. Make sure no foreign
objects fall through the ventilation slots because this
could cause re or an electric shock.
Do not place any objects on top of the receiver
because this might prevent proper cooling of the
components inside.
Never open the receiver cover. It is dangerous to
touch the inside of the receiver due to high voltage
currents and possible electrical hazards and your
warranty will be void. Refer all maintenance or
servicing to suitably qualied personnel.
When you are connecting cables, be sure that the
receiver is disconnected from the mains supply
voltage. Wait a few seconds after switching off the
receiver before you move the receiver or disconnect
any equipment.
It is a necessity that you only use an approved
extension and compatible wiring that is suitable for
the electrical power consumption of the installed
equipment. Please ensure that the electrical power
supply corresponds with the voltage on the electrical
identication plate at the back of the receiver.
If the receiver does not operate normally even after
strictly following the instructions in this user manual,
it is recommended to consult your dealer.
Your receiver and its accessories are stored and
delivered in a packaging designed to protect against
electric shocks and moisture. When unpacking it,
make sure that all the parts are included and keep
the packaging away from children. For transporting
the receiver from one place to another or if you are
returning it under warranty conditions, make sure to
repack the receiver in its original packaging with its
accessories. Failing to comply with such packaging
procedures could void your warranty.
We recommend you consult a professional installer to
set up your equipment. Otherwise, please follow the
instructions below:
Refer to the user manual of your TV and
your antenna.
Make sure that the SCART cable and outdoor
components are in a good condition and the SCART
connection is well shielded
This manual provides complete instructions for
installing and using this receiver. The following
symbols will serve as follow.
Indicates warning information.
Indicates any other additional
important or helpful information.
Represents a button on the
remote control or the receiver
Move to Represents a menu item within
a window. (Italic Character)
1. TCT 1500 1x
2. User’s Manual 1x
3. Remote control unit 1x