User manual
4. Batteries (AAA type) 2 x
The batteries should not be recharged,
disassembled, electrically short-
circuited, be mixed or used with other
types of batteries.
If rechargeable accumulators instead
of batteries are going to be used, we
recommend using (e.g. NiMH) types
with low self-discharge to ensure long
time operation of remote control.
It is recommended to use USB 2.0 storage devices.
TekComm cannot guarantee compatibility to all types
of USB storage devices.
It is advised not to store important information
on USB storage devices used with the receiver.
Always make backups of data on USB storage
device before usage with receiver. TekComm will
not take responsibility for any loss of information or
circumstances caused by loss of information.
1. INDICATION LED: Green LED during
operation, red LED in standby mode.
2. REMOTE SENSOR: Reception of
remote control signals.
3. USB CONNECTION: Connection to USB
storage device. Fig. 1
Fig. 2
1. A Loop through to connect an
extra receiver to the satellite
signal from dish
2. To connect to the LNB for
satellite signal from dish
3. To connect to your TV set
using a SCART cable.
4. To connect to the input of your
digital audio amplier.
5. Your receiver requires a mains
voltage of 100~240 V AC
(Auto-selectable), 50/60Hz
±5%. Make sure to check the
power specication before
connecting your receiver to
the wall outlet.
Fig. 3
1. q Turns the receiver On/Stand-
by
2. ! Mutes audio output of the
receiver
3. Changes channel and controls
numeric functions
4. Opens the available favourite
list if previously congured
5. Toggles between the two the
last watched channels
6. Opens the audio language(s)
and mode selection.
7. Opens the subtitle language(s)
selection
8. Shows the information banner
9. Displays the main menu and
returns to the previous level of
menu
10. Opens the EPG (Electronic
Programme Guide) in
TV mode.
11. Exits from any menu and
sub-menu or cancels the
progressing function
12. pq Switches to the previous/
next programme in TV mode.
Moves the cursor upwards/
downwards in menu mode
13. In TV mode it displays the
channel list according to the
chosen mode.
In menu mode activates the
highlighted menu item.
14. tu Increases/decreases the
volume level in TV mode.
Changes settings for specic
menu items in menu mode
15. Opens the Teletext
language(s) selection
16. Freezes your live audio and
video, press again to cancel