User's Manual

Eco Water Monitor User Manual
6 | P a g e
9-5939-02
2
H
The value displayed is the tank height.
W
The value displayed is the tank width.
Monitor Display:
Bar graph indicator of liquid level - each bar represents 10% of tank height. .
Tekelek Eco Water Sensor Display (If equipped with a display):
Tanks 1m/3.3ft. in height or greater - each bar represents 1/10th of the top 1m/3.3ft
of the tank.
Tanks less than 1m/3.3ft. in height - each bar represents 1/10th of 1m/3.3ft
Full
Indicates the ‘Full’ level of the bar graph indicator.
Liquid Level
Indicates the bar graph is showing the liquid level.
EMPTY
Indicates the ‘Empty’ level of the bar graph indicator.
BUND ALARM
When flashing, there has been a leak into the ‘Bund’ (double skinned tanks). The 10
bars and the RED LED will also be flashing at the same time.
TANK LOW
BATTERY
The sensor battery needs to be changed.
Flashing “near empty” symbol in the monitor – The remaining liquid level in the tank
is at 6cm/2.36inches or below of the tank outlet height.
Flashing “near empty” symbol in the sensor – The remaining liquid level in the tank is
at 10% or below the tank height.
Flashing – There is a problem with the RF signal from the sensor. Refer to
“Troubleshooting” for more details.
Static – Attempt to change the monitor system of measurement (SETUP mode 3)
with the risk of losing saved data.
The temperature of the sensor is measured at –8°C or below — the information
accuracy may be affected.
3
%
The value displayed is the % of usable water remaining in the tank.
cm\inches
The value displayed is in centimetres/inches
Ltr\Gal
The value displayed is in litres/gallons.
USB data activity.
675
Numeric display – used to show numeric values and the time.