User's Manual
Table Of Contents
- 1. Product Information
- 2. Features and Functions
- 3. Alarms
- 4. Technical Specifications
- 4.1 Tank Size
- 4.2 Displays
- 4.3 Audible Alarm
- 4.4 Max communication distance
- 4.5 Wireless Communications
- 4.6 Dimensions (Sensor)
- 4.7 Dimensions (Monitor)
- 4.8 Power Supply
- 4.9 Mains Power Supply (incl.) for Tekelek Eco-Water Monitor
- 4.10 Battery Life
- 4.11 Max and Min Operation (Sensor)
- 4.12 Max and Min Operation (Monitor)
- 4.13 Hole size for fitting sensor:
- 5. Tekelek sensor battery change
- 6. General Product safety, care and user guide lines
- 7. Troubleshooting
- 8. Notes
-
- 9. Warranty
Eco Water Monitor User Manual
7 | P a g e
9-5939-02
2.5 Display Screens
Information screens: Change between ‘Ltr or Gal’ (depending on units setting), %, Liquid height and Clock
display screens using the r and s keys.
Units in EU (Metric):
Units in USA (United States Customary System):
Eco-Water Monitor display
During use the Tekelek Eco Water sensor takes a level measurement twice a minute and sends measurement
information to the Eco Water monitor every 30 minutes. At the Eco Water monitor the level information is
presented as the remaining volume or as a % of the tank capacity or as the height of the liquid in the tank.
The Eco Water sensor continuously checks each new measurement against previous measurements and if it
detects a significant step change in the level measurement it will increase the rate at which it sends new
measurements to the Eco Water monitor to faster than once a second.
The Eco Water monitor checks that each measurement it receives is lower than tank height plus the offset
and higher than the sensor blind zone, in order to help ensure that the measurements presented are valid. If
this requirement is not met, it may temporarily display ’---’ to indicate that is uncertain about the validity of
the measurement information.