User's Manual

 Key Lock
Enable the key lock function.
 UP/DOWN Lock
Enable UP/DOWN lock function .
VOX

VOX level
Choose your desired VOX level.
 VOX Level Comparing Value
You can choose 0-180 branch setting in every VOX level for your radio.
 VOX Delay Time
This function helps you to make fluent communication by avoiding quickly back to TX mode
without transmitting the last sentence .
 No VOX During RX
When radio is receiving , VOX/IVOX are not available .
Battery
 Battery Save
The battery saver function decreases the amount of power used when a signal is not being
received and no operations are being performed ( no keys are being and no switches are being
turned ). But when your radio receives information first time ,the delay time will be longer .
 Low Battery Beeper Type
You can choose the desired beeper for low battery alert.
 Low Battery Alert
Set the interval by every low battery alert .
 APO
Radio will automatically turn off power if there is no operation within 5 minutes and alarm at
interval time before APO .Under APO mode, user can active radio by operating it again.
Off : Turn off APO function
APO Time : Turn on this function and set the time to auto power off as requested .
.
 Low Battery Voice Report
Radio will report low battery status if active this function.