MP3450_ug_0507_rev3_r1 6/6/07 10:08 AM Page 1 MP3450/MP3450-10 User Guide
MP3450_ug_0507_rev3_r1 6/6/07 10:08 AM Page 2
MP3450_ug_0507_rev3_r1 6/6/07 10:08 AM Page 1 USER GUIDE Contents Overview ......................................................................................................2 Getting Started..............................................................................................2 Unpacking myPower ALL Plus..................................................................2 Getting to Know myPower ALL Plus ........................................................3 Charging myPower ALL Plus .......
MP3450_ug_0507_rev3_r1 6/6/07 10:08 AM Page 2 Overview You can use myPower™ ALL—the universal rechargeable battery—to power just about any portable device. Simply connect myPower ALL to your notebook computer, portable DVD player, digital camera, digital camcorder, portable CD player, PDA, mobile phone, or other portable device to extend the battery life. As an added bonus, myPower ALL will charge the internal battery on some devices, while also powering the device.
MP3450_ug_0507_rev3_r1 6/6/07 10:08 AM Page 3 Getting to Know myPower ALL Plus Voltage Selector DC OUT For connection to device USB Port for connection to 5V device Voltage Indicators/Capacity Indicators Charging/USB Indicator Voltage Lock/USB Power MP3450 DC IN For connection to power adapter MP3450-10 Battery port for connection to MP3450-10 Charging myPower ALL Plus myPower ALL Plus will charge in four hours when completely empty.
MP3450_ug_0507_rev3_r1 6/6/07 10:08 AM Page 4 5. When the battery capacity indicates full, unplug the power adapter and slide the voltage lock right to the unlocked/off position (UNLOCK/OFF) to turn off the USB power when myPower ALL Plus is not in use. NOTE: myPower ALL Plus will automatically shut down the power input when fully charged, so you can charge it overnight. Using myPower ALL Plus myPower ALL Plus can be used to power and/or charge up to two portable devices simultaneously.
MP3450_ug_0507_rev3_r1 6/6/07 10:08 AM Page 5 Select/Connect the Adapter Plug 1. Select the adapter plug that fits securely into the power jack on your portable device. 2. Locate the polarity symbol on your device in the area around the power connector jack: Center Positive Center Negative WARNING: myPower ALL Plus supports Center Positive polarity only. If your device has a Center Negative polarity, do not power the device with myPower ALL Plus; contact support@tekkeon.com for assistance. 3.
MP3450_ug_0507_rev3_r1 6/6/07 10:08 AM Page 6 Connect the Power Output Cord 1. Plug the large end of the power output cord into the DC OUT jack on the end of myPower ALL Plus. The 5V voltage indicator will turn on to indicate that the voltage is set to the lowest setting. (If you have previously selected a voltage, the voltage selection will be returned to the lowest setting.) Adjust the Voltage Level 1. Locate the voltage specification for your portable device.
MP3450_ug_0507_rev3_r1 6/6/07 10:08 AM Page 7 TIP: You can optimize the use of myPower ALL Plus with your notebook computer or portable DVD player by setting the voltage on myPower ALL Plus to less than the required voltage shown on the notebook computer power supply. This prevents myPower ALL Plus from charging the device, thus extending the amount of time you can use myPower ALL Plus to power your notebook computer. Most notebook computers have a battery voltage of 11.1V or 14.
MP3450_ug_0507_rev3_r1 6/6/07 10:08 AM Page 8 Connect the Portable Device 1. Connect the adapter plug into the power jack on the portable device. 2. Turn on the portable device and use it as you would normally. While connected, myPower ALL Plus will power and charge your device. (As mentioned earlier, myPower ALL Plus will not charge a device if the voltage setting is lower than that required.) or Leave the portable device turned off and myPower ALL Plus will charge the device battery. 3.
MP3450_ug_0507_rev3_r1 6/6/07 10:08 AM Page 9 View myPower ALL Plus Battery Capacity The capacity in myPower ALL Plus will decrease as the battery powers and/or charges your devices. The remaining capacity is shown on the voltage indicator, which is accessed as described below. As the remaining capacity decreases, the lights will turn off in sequence from right to left. When the myPower ALL Plus battery capacity is low, only the red EMPTY light will be on.
MP3450_ug_0507_rev3_r1 6/6/07 10:08 AM Page 10 Recording Device Information The Device At-A-Glance Card included with myPower ALL Plus enables you to record the information you need to use myPower ALL Plus with each of your portable devices. Simply record the device name, required voltage, and reference letter for the compatible adapter. Store the card in the pocket provided inside the leather case.
MP3450_ug_0507_rev3_r1 6/6/07 10:08 AM Page 11 Charging the Extended Battery 1. With MP3450-10 connected, charge MP3450 as described earlier. Both batteries will be charged at the same time (in parallel). Troubleshooting If myPower ALL Plus does not power the portable device or charge the device battery, take these steps: 1. Verify that the current consumption of the portable device is not more than 3.5 Amp.
MP3450_ug_0507_rev3_r1 6/6/07 10:08 AM Page 12 Limited Warranty The product enclosed herein is warranted to be free of operational defects for a period of one year from the date of purchase. In the event of a defect in operation during the warranty period Tekkeon, Inc. will replace the defective product when the owner returns all product contents.
MP3450_ug_0507_rev3_r1 6/6/07 10:08 AM Page 13 Customer Support Customer support for myPower ALL Plus is available at: Tekkeon, Inc. c/o myPower ALL Plus 3002 Dow Avenue, #134 Tustin, CA 92780 888-787-5888 / 714-832-1266 www.tekkeon.com Tekkeon, Inc. must issue a Return Merchandise Authorization (RMA) number for all exchanges or refunds. www.tekkeon.
MP3450_ug_0507_rev3_r1 6/6/07 10:08 AM Page 14 www.tekkeon.com © 2007 Tekkeon, Inc. Rev A All Rights Reserved myPower™ ALL Plus is a trademark of Tekkeon, Inc. Cut loose. Stay loose.
