Dual Port Emergency Charger MP1860A User Guide
Dual Port Emergency Charger USER GUIDE Contents Overview...................................................................................................................................2 Getting Started.........................................................................................................................3 Unpacking TekCharge MP1860A........................................................................................3 Getting to Know TekCharge MP1860A..................................
Overview TekChargeTM MP1860A is a dual port emergency charger with two outputs to simultaneously charge and power your iPadTM, iPhone®, iPod® nano or iPod® touch, and a second small portable device.
Getting Started Unpacking TekCharge MP1860A Your TekCharge MP1860A package includes the following: User guide (not shown) Registration card (not shown) TekCharge MP1860A myCharger USB power adapter 30-pin USB cable Retractable input/output USB cable Micro USB Mini USB Adapter tips for BlackBerry,® Motorola & More USER GUIDE Adapter tip tote 3
Getting to Know TekCharge MP1860A Capacity Indicator Color indicates the battery capacity of the rechargeable battery. Output Port (5V OUT) For charging and syncing your iPad, iPhone or iPod, or charging other 5V devices. Power Switch Powers USB port, and turns on the flashlight. Output Port (5V OUT) For charging and syncing your iPad, iPhone or iPod, or charging other 5V devices. Mini USB Port (5V IN) For connection to USB port on a computer or power adapter to charge the rechargeable battery.
Using TekCharge MP1860A TekCharge MP1860A can be used to power or charge any portable device that requires 5V. If your device has a DC jack with center negative polarity, do not power the device with TekCharge as it does not support center negative polarity. Center Negative Center Positive TekCharge MP1860A can be used to power two devices at once by connecting one device to each output port. However, the output current for both ports is limited to a total of 2.5A.
Or To charge both TekCharge MP1860A and the connected device, slide the power switch to ON. TekCharge MP1860A will be charged first, and will in turn charge the connected device(s). This connection will work only for devices that charge slower than the input power (1A). If the connected device draws more power than the input power, TekCharge MP1860A will be depleted at some point. 5.
Charging your iPad, iPhone or iPod Using the 30-Pin USB Cable 1. Insert the USB plug on the 30-pin cable into one of the output ports on TekCharge MP1860A. 2. Connect the 30-pin connector into the dock connector on your iPad, iPhone or iPod. 3. Slide the MP1860A power switch to ON to provide power through the USB port. 4. Turn on your iPad, iPhone, or iPod and use it as you would normally. While connected, TekCharge MP1860A will power and/or charge your device.
Charging a Device Using Your Device USB Cable You can use your own device USB cable to connect to your device. However, for devices with Mini or Micro USB power ports, it is highly recommended that the included Mini or Micro USB adapter tips with retractable cable are used in place of the device USB cable. 1. Insert the USB plug on the device cable into one of the output ports on TekCharge MP1860A. 2. Connect the opposite end of the USB cable into the power jack on your portable device. 3.
Charging a Device Using an Adapter 1. Select the adapter tip that fits securely into the power jack on your portable device and plug it into the retractable input/output cord. 2. Insert the USB plug on the input/output cord into one of the output ports on the end of TekCharge MP1860A. 3. Connect the adapter plug into the power jack on your portable device. 4. Slide the TekCharge MP1860A power switch to ON to provide power through the USB port. Charging a device using an adapter. 5.
Troubleshooting If TekCharge MP1860A does not power your portable device or charge the device battery, take these steps: 1. Check that the input/output cord is connected to both TekCharge and the portable device, and that the adapter plug fits snugly into the power jack on your portable device. If not, try another adapter tip. 2. If connecting TekCharge to a device with a DC jack, verify that the polarity of the device power jack is center positive.
Limited Warranty The product enclosed herein is warranted to be free of operational defects for a period of one year from the date of purchase from a Tekkeon authorized reseller. In the event of a defect in operation during the warranty period Tekkeon, Inc. will replace the defective product when the owner returns all product contents.
Customer Support Customer support for TekCharge is available at: Tekkeon, Inc. c/o TekCharge MP1860A 30 Mauchly, Suite A Irvine, CA 92618 888-787-5888 / 714-832-1266 www.tekkeon.com Tekkeon, Inc. must issue a Return Merchandise Authorization (RMA) number for all exchanges or refunds.
www.tekkeon.com © 2010 Tekkeon, Inc. All Rights Reserved. TekCharge™ is a trademark of Tekkeon, Inc. Specifications are subject to change without notice. iPhone, iPod, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. iPad is a trademark of Apple Inc.
