Installation

ManualsBrandstekmar ManualsRelay479 User Switch

Table of Contents ............................................................2

Sequence of Operation ...................................................2

Applications ....................................................................3

Error Messages ..............................................................3

Cleaning the User Switch ..............................................4

User Button Label Template ...........................................4

Warranty .........................................................................4

Table of Contents

Three User Buttons

Sequence of Operation

The User Switch provides users with a simple interface to

change the operating scene of the tN4 system.

Each of the 3 User Buttons is programmed to select a

particular scene on the tN4 system. The temperature of

each tN4 thermostat in the system is pre-programmed

by the installer for each of the scenes. This allows users

to change the temperature of all the thermostats using a

single button.

Current Scene

Press the

Same Button

New Scene

Perm Scene 1 No Change

Perm Scene 2

- Away

Selects Scene 1

Perm Scene 3

- Unoccupied

Selects Scene 1

tN4 thermostats must have Scenes turned to “On” in order

to respond to scene changes on the User Switch.

When a User Button is pressed, the green LED under

that button turns on and remains on until a new scene is

selected.

When the current selected scene on the tN4 network is the

same as the scene that the User Button is programmed

for, the button turns green.

When a selected scene is “On” and that User button is

pressed again, the scene is changed based on the following

table:

Away

Included with the User Switch are labels to identify the

operation of each User Button. Each label has a description

on it. Choose the label with the appropriate description for

each button.

A template has been included on the back page to create

your own labels.

Insert the label into the slot located under the right hand

side of each User Button.

Repeat for each User Button.

Away