Installation Owner manual

ManualsBrandstekmar ManualsRelay480 User Switch

Information

Brochure

Choose controls

to match

application

Application

Brochure

Design your

mechanical

applications

Rough In

Wiring

Rough-in

wiring

instructions

Wiring

Brochure

Wiring and

installation of

specific control

Data

Brochure

Control settings

and sequence of

operation

Job

Record

Record settings &

wiring details for

future reference

D 480

09/09

tekmarNet

4 User Switch 480

- Data Brochure

Introduction

The User Switch 480 has 3 programmable buttons that allow users to easily change the operating scene or allow users to

enable / disable tN4 setpoint devices on a tN4 system.

Multiple User Switches are required if more than 3 scenes or setpoint enable / disables are desired.

The 480 has 3 demand inputs that allow for connection of a tN4 system to a third party automation system or telephone

switch. This allows users to remotely change the operating scene on a tN4 system.

Features

•

• tN4 Compatible

•

• 3 User buttons

•

• 3 Demand Inputs

- Input for Home or Building Automation

- Input for Telephone Switch

- Input for Security Systems

User

Button

User

Button

User

Button

Decora cover plate not included

Summary of content (8 pages)

PAGE 1
- Data Brochure D 480 tekmarNet®4 User Switch 480 1 Information Brochure 2 Application Brochure Choose controls to match application Design your mechanical applications 3 09/09 4 Rough In Wiring Wiring Brochure Wiring and installation of specific control Rough-in wiring instructions 5 Data Brochure Control settings and sequence of operation 6 Job Record Record settings & wiring details for future reference Introduction The User Switch 480 has 3 programmable buttons that allow users to easil
PAGE 2
Table of Contents Table of Contents............................................................2 User Interface .................................................................2 Sequence of Operation...................................................3 3 User Buttons .......................................................3 Programming the User Buttons ..............................4 Demand Inputs ...............................................................
PAGE 3
Sequence of Operation Three User Buttons The User Switch provides users with a simple interface to change the operating scene of the tN4 system or provide an enable / disable to tN4 setpoint controls. The 480 has 3 User Buttons and 3 demand inputs. Application Examples: Allows residential users to change the scene to 2 (Away) while going on vacation, or select an occupied scene while entertaining guests.
PAGE 4
Programming the User Buttons STEP 1: Remove the plastic trim bezel. User Button 1 User Button 2 User Button 3 STEP 2: Press button “A” once using a blunt object to begin programming mode. Each of the 3 User Buttons will begin to flash to indicate the current program setting: • Red flashes indicate the User Button is programmed to select a scene. The number of flashes in a row indicate the scene number. • Green flashes indicate the User Button is programmed to enable or disable a tN4 setpoint control.
PAGE 5
STEP 4 (Continued) (Setpoint Device Enable, Green Flashes) Press the User Button the number of times equal to the desired setpoint device enable number.
PAGE 6
Demand Inputs Three Demand Inputs The 3 demand inputs allow a third party device to select a scene for the tN4 system. The third party device could be an automation system or a telephone switch with dry relay contacts or a 24 V (ac) powered output. The third party device output connects to one or more of the 480 demand inputs.
PAGE 7
Applications using Multiple 480 and 481 Together Multiple User Switches 480 and 481 can be used together when: Applications with both input demands and output relay contacts 1) Applications require more than 3 User Buttons. Applications that require input demands and output contacts require a 480 and a 481. The 480 provides the input demands and the 481 provides the output contacts. 2) Applications require both input demands and output relay contacts.
PAGE 8
Cleaning the User Switch The User Switch’s exterior can be cleaned using a damp cloth. Moisten the cloth with water and wring out prior to wiping the device. Do not use solvents or cleaning solutions. User Button Label Template 1.03” (26.2 mm) 0.62” (15.7 mm) 0.44” 0.62” (11.0 mm) (15.8 mm) 1. Download the User Switch Data Brochure PDF file D480.pdf from the Downloadable Literature Section on our tekmar website: http://www.tekmarcontrols.com to your computer. 2.