Installation Guide

ManualsBrandstekmar ManualsHeating, Ventilation, and Air Conditioning518 - Digital Non-Programmable 1-Stage Heat Thermostat in White

D - 06/16

9 of 12

Programmable Settings

Setting Display

User settings. Press the

and

buttons together for 3 seconds to enter and

advance to the next setting.

MODE Select heat or off.

Range: HEAT, OFF

Default: HEAT

UNITS Select the temperature units.

Range: °F or °C

Default: °F

LIGHT Select when the display back light should operate. Auto

operates the backlight for 30 seconds after a keystroke.

Range: OFF, AUTO, ON

Default: AUTO

SET FLOOR Set the floor minimum temperature. Available

when an auxiliary floor sensor is connected and the built-in

room sensor is on.

Range: OFF, 40 to 122°F (4.5 to 50.0°C)

Default: 72°F (22.0°C)

TYPE Device Type number. Hold the

button to view the

software version.

ESCAPE Release the

and buttons to return to the

home screen.

Installer settings. Press the

and

buttons together for 5 more seconds.

AUXILIARY SENSOR Select the type of auxiliary sensor.

Available when an auxiliary sensor is automatically

detected.

Range: NONE = no auxiliary sensor, ROOM = Indoor

Sensor, FLOR = Slab Sensor, OUT = Outdoor Sensor

Default: OFF

ROOM SENSOR Select if the built-in room temperature sensor

is on or off. The built-in room sensor can only be disabled

when an auxiliary room or slab sensor is connected.

Room

Range: ON or OFF

Default: ON

SET FLOOR MAXIMUM Set the floor maximum temperature

in order to protect the floor covering. Suggested settings:

Tile = 90°F (32°C), Wood Floor = 85°F (29°C)

MAX

Range: 40 to 122°F (4.5 to 50.0°C), OFF

Default: 85°F (29.5°C)

SET AWAY Set the away temperature.

Range: OFF, 40 to 122°F (4.5 to 35.0°C)

Default: 50°F (10.0°C)

ESCAPE Release the

and buttons to return to the

home screen.