User Manual 519_U Radiant Thermostat 519 06/16 Zoning © 2016 tekmar 519_U - 06/16 Replaces: 03/13
This brochure will provide you with the information you need to benefit the most from your tekmar Thermostat. Please visit tekmarControls.com for more detailed information on this or any other tekmar product. User Interface Away Display Symbols This thermostat will display symbols on its screen in order to indicate what mode it is in, what temperature it is operating at, or what equipment it is trying to turn on. This section describes each of those symbols. HEAT ON Heat is turned on.
Setting The Temperature To change the heat temperature setting, push the preferred temperature setting. or buttons to select a Air Temperature Only----------------------------------------------If there is only an air temperature sensor (no floor sensor), the thermostat operates to control your desired air temperature. Floor Temperature Only--------------------------------------------If the air sensor has been disabled, the thermostat will only maintain floor temperature and ignore air temperature.
Settings • Press and hold down both the and buttons for 3 seconds to change from one step to the next. • Release both buttons once the step has been reached. • Press the or the button to change the setting, if available. • Press and hold down both the and buttons for 3 seconds to go to the next step, OR • After 15 seconds of no button activity, the display goes back to normal operation. Display Setting User settings. MODE Select heat or off.