User Manual

TKR6091
TKR6140
TKR1529
TKR1202
Note: Slot in spring
perch should face
outside of vehicle.
TKR1605
TKR6015
TKR6008
TKR6009
TKR6016
M2.5 Lock Nut Zinc
TKR1200
x2
TKR1211
M3 Lock Nut Flange Black
x2
*TKR6090
*TKR6092
*TKR6093
(Option)
Note:
Shaft guide
orientation
Note: Front shocks use
shorter shock bodies -
TKR6016,
shorter shock shafts - TKR6017,
shorter springs - TKR6091
and shorter shock boots - TKR6144
Step
O-1
Step
O-2
Step
O-3
TKR1200
TKR6051
(conical)
(tapered)
TKR6017
TKR5049A
*TKR6017T
(Option)
*TKR6159
*TKR6160
(Option)
*TKR6050
*TKR6052
*TKR6053
*TKR6054
*TKR6063
*TKR6064
*TKR6065
(Option)
Note: Use green
slime or oil on
shock shaft
threads AND
O-rings to
prevent tearing
and leaking.
TKR6140
TKR6144
Note: Shock boots
must be installed
before attaching
rod end.
TKR1202
M4 Lock Nut Black
x2
TKR1211
TKR6007
TKR5027
Note: Tighten TKR1211 lock nut all the way down, then back o 1/4 turn. Use thread lock!
Thread
Lock
TKR6003B
TKR6009
TKR6013
*TKR6003
*TKR6018
(Option)
Note: Apply a small
drop of oil for
easy installation.
Fill oil level just
below the
top of
the shock body.
Use #650wt oil
FRONT
650
Note:
Conical side up
TKR1529
M3x20mm Cap Head Screw
x2
Bag O
Front Shock Assembly
20
Stock shock position is outside
hole on the arm and 2nd from
outside hole on the tower
Stock front ride height 37mm
Shock length (droop) 122mm
TKR1605
M3x10mm Set Screw
x2
Note: Make sure to tighten both cartridge cap
(TKR6015) and shock cap (TKR6003B) to ensure
a proper seal. Tools may be required.