Installation Instructions
5
1. Using standard screw
gun, begin drilling Teks
through material
2. Teks screws tap their
own threads in metal
substrate
3. Continue drilling until
screw is seated flush
Installation Tips:
•
For optimal performance, screw gun should be a
minimum of 4 amps and 0
-
2000 RPM
•
Fastener must penetrate beyond metal a
minimum of 3 thread pitches
•
Fastener is fully seated when head is flush
•
Overdriving may result in torsional failure of
fastener or strip
-
out of substrate
For Roofing Screws Only: