Installation Instructions

ManualsBrandsTeks ManualsFasteners#8 x 1 in. Phillips Zinc-Plated Steel Truss-Head Lath Screws (170-Pack)

5

1. Using standard screw

gun, begin drilling Teks

through material

2. Teks screws tap their

own threads in metal

substrate

3. Continue drilling until

screw is seated flush

Installation Tips:

•

For optimal performance, screw gun should be a

minimum of 4 amps and 0

-

2000 RPM

•

Fastener must penetrate beyond metal a

minimum of 3 thread pitches

•

Fastener is fully seated when head is flush

•

Overdriving may result in torsional failure of

fastener or strip

-

out of substrate

For Roofing Screws Only:

Summary of content (1 pages)